limiting stress中文是什么意思

发音:

中文翻译
造句

极限应力
临界应力

limiting adj. 限制(性)的，有限制力的，起限定作用的〔不涉及 ...
stress n. 1.压力，压迫，紧迫，紧张。 2.【语音】重音；重 ...
limiting creep stress 极限蠕变应力; 极限徐变应力
limiting fatigue stress 极限疲劳应力
limiting maximum stress 极限最大应力
limiting minimum stress 极限最小应力
limiting range of stress 应力极限范围
limiting shear stress 极限剪应力
limiting shearing stress 极限剪切应力
limiting stress circle 极限应力圆
limiting tangential stress 极限切向应力
true limiting creep stress 真极限蠕变应力
limiting adj. 限制(性)的，有限制力的，起限定作用的〔不涉及性质的各种定语如： several, four 等〕。
stress n. 1.压力，压迫，紧迫，紧张。 2.【语音】重音；重读；【诗】扬音；语势，着重点。 3.重要(性)，重点，强调。 4.【物理学】应力；胁强，重力。 The landlord has imposed a severe stress on the poor tenants. 房东给贫苦的房客们加了很大的压力。 We must lay stress on self reliance. 我们必须强调自立更生。 Give stress to the 2nd syllable. 重读第二音节。 stress diagram 【工业】应力图。 moisture stress 缺水。 tensile stress 【材】抗张应力。 be stressed out (因心理压力过重而)精疲力尽的。 driven by stress of＝under stress of. in times of stress 在紧张[繁忙，困难]的时候。 lay [place, put] stress on 强调，用力干，着重于。 under stress of 被…逼迫着，在…强制下，由于，因为。 vt. 1.着重，强调，加重语气说。 2.用重音读。 3.加压力[应力]于，压，压迫。 adj. -ful ,-less adj.
stress on 对…的强调
the stress 搭配的单词
amplitude limiting 限幅
angle limiting 临限角
anterior limiting 角膜前弹性层
band limiting 频带限制
current limiting 限流
current-limiting 限流
demand limiting 需求限制
diode limiting 二极管限幅
double limiting 双向限幅

"查查词典"手机版

千万人都在用的超大词汇词典翻译APP

例句与用法

This paper overviewed the prediction methods of forming limit in sheet metal forming , which included forming limit stress diagram , the maximum forming thinning ratio , forming limit diagram and ductile fracture criteria ( dfc )
摘要对板料成形中的成形极限应力图、最大变薄率、成形极限图以及韧性断裂准则等预测成形极限的方法，进行了综述和分析。
According to the former mathematical calculation models , the applied software , which uses the forming limit stress diagram as its instability criterion , is developed based on the sheet metal forming finite element code dynaform using visual c + +
根据以上所建立的数学计算模型,基于板成形专用有限元分析软件dynaform的环境,用visualc + +开发了以成形极限应力图作为判据的应用软件。
3 . the crane load and fatigue strength are regarded as stochastic process , the fatigue dynamic reliability based on limit stress model and fatigue dynamic reliability based on accumulation damage model are established on the base of statistic analysis the fatigue load and resistance
3 、在对疲劳荷载与抗力统计分析的基础上，视吊车荷载与疲劳强度为随机过程，建立了基于极限应力模式的疲劳动态可靠性分析模型及基于累积损伤模型的疲劳动态可靠性分析模型。
In view of the above reason , this thesis adopts the forming limit stress diagram as the instability criterion due to its independence of strain paths , which is acknowledged at home and abroad in the field of sheet metal forming , and develops the applied software for the special purpose finite element analysis code dynaform in order to provide it with a new instability criterion
本文基于板成形专用有限元分析软件dynaform ,以国内外板料成形领域认同的具有应变路径独立性优点的成形极限应力图为判据进行了应用软件的二次开发,以期为板成形有限元分析软件提供一个新的失稳判据。
This thesis briefly analyzes some yield criteria and instability criteria to the sheet metal forming first . then according to the transformation rule from ultimate strain to ultimate stress , it establishes the mathematical calculation models of the forming limit stress diagram for the software development according to hill48 、 hill79 and hosford yield criterion irrespectively
本文首先分析了板料成形的屈服准则和失稳准则,然后根据极限应变到极限应力的转换关系,分别采用hill48屈服准则、 hill79屈服准则和hosford屈服准则,建立了用于软件开发的成形极限应力图的数学计算模型。
The goal of analyzing the instability in complex sheet metal forming is reached using the forming limit stress diagram as criterion in this thesis . some different sheet metal forming parts are analyzed with the developed software , whose results show that the developed software is satisfying for technological analysis of sheet metal forming and the applied module attains the anticipated goal
并用所开发的应用软件成功地对板成形零件的有限元计算结果进行了分析,分析结果表明,用该软件分析板成形零件的失稳情况的结果可以满足板成形工艺分析要求,所开发的应用软件模块达到了预期目的。
Saturated sand are testes in the laboratory under the undrained cyclic loading condition with static - dynamic dual purpose triaxial compression test apparatus , which is designed under the cooperation of hohai university and marui co . ltd japan . the results indicate that the stress path approaches from a initial stress point to the failure lines as cyclic loading goes on , and eventually converges on a certain limiting stress path in the vicinity of the failure lines . the stress - strain curve , however , does not converge on a closed hystersis loop ; the shear strain rapidly increases in looser sand or gradually and continually increases in denser sand
利用河海大学与日本圆井株式会社共同研制的新型的多功能静动三轴仪进行了饱和砂土循环扭剪不排水试验，研究表明，对于松砂，剪应变幅度快速地由微小增加到百分之几甚至百分之十几，对于紧砂，剪应变幅度逐渐地由微小增加到百分之几甚至百分之十几；经试验初步研究表明用初始有效平均正应力归一化的有效应力路径很好的一致性。